Reference: DST4XTX
Brand: Apeks
Dry Sealed System with swivel turret (DST)
Reference: ARGONSTAGE_VNEJSI-SROUBENI
Brand: BtS
Regulator 1st stage for ARGON
Reference: M1DIN1ST
Brand: Atomic Aquatics
With its extremely wide power spectrum, the M1 is suitable for the most demanding diving conditions imaginable
Reference: XSTREAMDEEPG58
Brand: POSEIDON
Xstream DEEP MK3 is the new 1st stage from POSEIDON.
APEKS TEK3
The first stage from Apeks, TEK3 has been designed for technical divers to best suit their specific needs.
TEK3 is based on the proven construction of Apeks membrane sealed first stages. It is designed specifically for a dual cylinder configuration - double-mount - to meet specific hose routing requirements from the first stages.
The TEK3 has three medium pressure 3/8 "UNF ports and one high pressure 7/16" UNF port. All ports are located flush so that the hoses connected to them extend from the first stage in one direction.
TEK3 is available in two versions - left and right. The first stages are connected to the valves by outer diaphragms facing each other, allowing maximum access to the valves.
NITROX TEK3 will also be available with both DIN and M26 DIN standards.
Of course there is a DS (Dry Sealed) system known from closed first stages of Apeks.
The weight of one TEK3 first stage is 0.7kg.
Characteristics:
Data sheet
Specific References
Reference: HPHADICE
Brand: DIVERS DIRECT
Flexible, Kevlar-reinforced rubber high-pressure hose for manometer, optionally in lengths of 0.15 - 1.20 m.
Reference: XTX50IIST
Brand: Apeks
The second stage is equipped with XTX50 RVS (duplex venturi system), DCE (removable louvers deflectors), CRC (stepless inspiratory resistance using bolt) and heat exchanger. It is suitable for diving in cold water (less than 10 ° C.
Reference: ORINGSETDM
Brand: Divemarine
Practical box. Set of O-rings, 4 sizes of 10 each.
Reference: ZAKETHADICEFLEX_100-CM
Brand: DIVERS DIRECT
Flexible, medium pressure hose for inflator or dry suit with double outer braid, optionally in lengths of 0.20 - 1.00 m.
Reference: TEKMANOMETR
Brand: SOPRASSUB
Metal SPG in a plastic cover 300 bars
Reference: XTX40IIST
Brand: Apeks
The second stage is equipped with XTX40 RVS (duplex venturi system), DCE (removable louvers deflectors) and heat exchanger.
Reference: ZAKETHADICE
Brand: DIVERS DIRECT
Medium pressure hose for inflator or dry suit, optionally in lengths of 0.20 - 0.80 m.
Reference: VAZELINADM
Brand: Divemarine
Silicon grease from Divemarine is an excellent agent for lubricating and preserving your equipment.
Reference: LPHADICE
Brand: DIVERS DIRECT
Medium pressure hose to connect stage I and stage II automation, optionally in lengths of 0.50 - 2.10 m, black.
Reference: DS4NITROX
Brand: Apeks
The cornerstone of many divers' breathing apparatus worldwide.
Reference: CYKLON1ST
Brand: POSEIDON
Balanced membrane construction hermetically separated from the external environment (prevents the penetration of impurities), allows use in very turbid water.
Reference: DST4XTX
Brand: Apeks
Dry Sealed System with swivel turret (DST)
Reference: XSTREAMDURATIONG58
Brand: POSEIDON
Approved for gas mixtures up to 99.95% O2 and usable for diving with Trimix, Nitrox or as a deco regulator.
Reference: JETSTREAM1ST
Brand: POSEIDON
Poseidon's legendary Jetstream first stage features a robust design, high flow rate and long life.
Reference: FSR5TUNGSTEN
Brand: Apeks
It features a sophisticated design tuned for best performance.
Reference: ST1DIN1ST
Brand: Atomic Aquatics
The first stage is carefully made by chip machining from special type 316 stainless steel, which is twice as strong as brass and is close to titanium in its corrosion resistance.
Reference: XSTREAMDURATIONM262
Brand: POSEIDON
Approved for gas mixtures up to 99.95% O2 and usable for diving with Trimix, Nitrox or as a deco regulator.
Reference: FSRXTX200DIN5
Brand: Apeks
Second best from Apeks. Suitable for cold water
We use third-party cookies to enhance your browsing experience, analyze site traffic and personalize content, ads. Learn more.
