Digi2 is the digital response pressure gauge and depth gauge you must have for diving. As a diver, you need a tool to check depth and residual air (or gas). the Digi2 was developed with the main concept of providing all the information in a compact device that displays data digitally and in large quantities.
The information is easier to read than a traditional pressure gauge with a needle and small digits. It has a high contrast display showing depth, pressure, remaining dive time and water temperature. It also provides the maximum depth reached and the time you have been diving. Depth display up to 120 m | 393 ft Pressure display up to 300 BAR | 4350 psi. Ari/gas reserve indicator starts flashing when pressure drops below 50 BAR | 725 psi.
Digi2 has an all on one anti-scratch display, there are no buttons, no menus to navigate. It's compact, lighter than traditional analog gauges, great for travel (122 g | 4.3 oz). User replaceable battery with sealing sensor. If the battery cover is not screwed on properly, the Digi2 will advise you (Cressi patent).
Digi2 has low power consumption, the battery could last 1,000 hours. The screen will turn off when not in use, and automatically turn off when you remove the cover or when connected to the HP first stage port.When the battery indicator starts flashing, you can finish the safety dive, the residual life is about one week. It comes with a magnetic cover for storage, but also for changing from metric to imperial system (Cressi patent).
Digi2 is a digital gauge, it is not a dive computer. You cannot plan or record dives. It is a must for every diver, recommended for beginners and those with poor eyesight. Shockproof ABS case with thermoplastic rubber cover with integrated mounting ring for connection to BCD.
