Reference: DST4XTX
Regulator APEKS 1.st DST4 - DIN (XTX)
Dry Sealed System with swivel turret (DST)
Reference: DIANA
Unbalanced piston first stage, easy to use - 1 high pressure and 4 low pressure outlets
Reference: M1DIN1ST
With its extremely wide power spectrum, the M1 is suitable for the most demanding diving conditions imaginable
Sharing the same technical features with the higher end XTX200, the XTX100 first stage is machined from a solid piece of marine brass, but finished in luxurious satin chrome rather than the polished chrome or PVD of the more expensive models. Suitable for cold water.
Data sheet
Reference: HPHADICE_20-CM
Brand: DIVERS DIRECT
Flexible, Kevlar-reinforced rubber high-pressure hose for manometer, optionally in lengths of 0.15 - 1.20 m.
Reference: ORINGSETDM
Brand: Divemarine
Practical box. Set of O-rings, 4 sizes of 10 each.
Reference: ZAKETHADICEFLEX_100-CM
Brand: DIVERS DIRECT
Flexible, medium pressure hose for inflator or dry suit with double outer braid, optionally in lengths of 0.20 - 1.00 m.
Reference: TEKMANOMETR
Brand: SOPRASSUB
Metal SPG in a plastic cover 300 bars
Reference: ZAKETHADICE_50-CM
Brand: DIVERS DIRECT
Medium pressure hose for inflator or dry suit, optionally in lengths of 0.20 - 0.80 m.
Reference: VAZELINADM
Brand: Divemarine
Silicon grease from Divemarine is an excellent agent for lubricating and preserving your equipment.
Reference: LPHADICE_110-CM
Brand: DIVERS DIRECT
Medium pressure hose to connect stage I and stage II automation, optionally in lengths of 0.50 - 2.10 m, black.
Reference: VENTILAPRV
Brand: Apeks
Adjustable safety valve for 1st stage of regulators. Suitable for argon bottle to dry suits.
Reference: M1DIN1ST
Brand: Atomic Aquatics
With its extremely wide power spectrum, the M1 is suitable for the most demanding diving conditions imaginable
Reference: MTXRDIN
Brand: Apeks
MTX-R is based on the MTX - developed by United States Navy for extreme conditions
Reference: PLUTONE_CHROM-DIN-DO-STUDENE
Brand: SOPRASSUB
Balanced diaphragm first stage, easy to use - 2 high pressure and 5 low pressure outlets.
Reference: FSR5TUNGSTEN
Brand: Apeks
It features a sophisticated design tuned for best performance.
Reference: ARGONSTAGE_VNEJSI-SROUBENI
Brand: BtS
Regulator 1st stage for ARGON
Reference: TEK3_LEVY
Brand: Apeks
The first stage Apeks TEK3 was designed for technical divers.
Reference: DST5
Brand: Apeks
Same as DST4 with one extra axial MP port
Reference: DIANA
Brand: SOPRASSUB
Unbalanced piston first stage, easy to use - 1 high pressure and 4 low pressure outlets
Reference: XSTREAMDURATIONG58
Brand: POSEIDON
Approved for gas mixtures up to 99.95% O2 and usable for diving with Trimix, Nitrox or as a deco regulator.
Reference: MINERVA_DIN
Brand: SOPRASSUB
Balanced piston first stage, simple to use - 2 high pressure and 5 low pressure outlets